Meeting challenges of today’s oil-and-gas and energy industry

Pumping equipment

  • Pumps of API-610(ISO,ANSY) Standards

 

Cradle-Mounted Pumps API (API-OH2, API-OH3)

 

Pump for severe operation conditions, high temperature and working pressure completely correspond to ultimate API 610 requirements. Centerline support provides sturdiness for high temperatures and maximum rigidness of structure. Tangential tap increases hydraulic efficiency.

 

Flow rate up to 1475 m³/h, thrust up to 350 m, pressure up to 6000 kPa, temperature up to 427 °С.

 

Single-Stage Pumps with Radially Split Frame between Bearings (API BB2)

 

Flow rate up to 4540 m³/h, thrust up to 455 m, temperature up to 455 °С., pressure up to 6895 kPa.

 

Double-Stage Pumps with Radially Split Frame between Bearings

 

Flow rate up to 340 m³/h, thrust up to 425 m, temperature up to 455 °С., pressure up to 5170 kPa.

 

Technological Pumps (ANSI/ISO)

 

Flow rate up to 1364 m³/h, thrust up to 222 m, temperature up to 260 °С., pressure up to 2586 kPa.

 

Semi-Submersible Pumps (API VS4) reliably perform any task of liquid drain from tank.

 

Flow rate up to 722 m³/h, thrust up to 160 m, temperature up to 232 °С., tank depth up to 6 m.

 

Multi Stage Pumps with Radially Split Frame for Severe Operation Conditions (API BB3)

 

Flow rate up to 590 m³/h, thrust up to 1675 m, temperature up to 205 °С., pressure up to 17238 kPa.

 

 

 

Technological Pumps Corresponding to API-610/ISO Requirements


 

 

Sump Pumps API-610


 

 

 

  • Jet Pumps:

 

-Vapor Jet Pumps (Thermocompressors)
-Vapor Jet Vacuum Pumps
-Vapor Jet Liquid Pumps
-Gas Jet Pumps
-Gas Jet Vacuum Pumps (Combination With Liquid Ring Pumps)
-Gas Jet Pumps for Solid Materials (Jet Transport)
-Gas Jet Gas Blenders
-Exhaust Gas Fans
-Fluid-Jet Gas Compressors
-Fluid-Jet Vacuum Pumps
-Fluid-Jet Fluid Pumps
-Fluid-Jet Pumps for Solid Materials

 

  • Multi Stage Vapor Jet Vacuum Systems:

 

-Water vapor as working medium without interstage condensation, with direct-contact condensation (closed systems), with surface condensation combination, with liquid ring pumps
- Process vapor as working medium with direct-contact condensation (closed systems), with surface condensation combination, with liquid ring pumps

 

  • Mud-Pumps

 

Flow rate: from 7 l/sec to 1500 l/sec Max. thrust: 60 m

Flow rate: from 7 l/sec to 350 l/sec Max. thrust: 60 m

Flow rate: from 4 l/sec to 2000 l/sec Max. thrust: 40 m

 

 

 

  • Pumps with Water Steeped Seal

 

Flow rate: 7l/sec to 130 l/sec
Max. thrust: 55 m

 

 

  • High Pressure Mud-Pumps

 

Flow rate: from 38 l/sec to 350 l/sec
Max. thrust: 95 l

 

 

 

  • Pumps for Chemical Industry

 

Flow rate: from 35 l/sec to 250 l/sec
Max. thrust: 105 m

 

 

 

 

  • Pumps for Gravel Blend

 

Flow rate: from 80 l/sec to 1500 l/sec
Max. thrust: 40 m

 

 

 

 

  • Tank Drainage Pumps

 

Flow rate: from 13 l/sec to 140 l/sec
Max. thrust: 35 m

 

 

 

 

  • Mud Drainage Pumps

 

Flow rate: from 5 l/sec to 30 l/sec
Max. thrust: 28 m

 

 

<< Back

Moscow, Russia, E-mail: eps-e@eps-e.ru
Tel./Fax: +7(495) 780-57-86 - multichannel